RegOŽ Products LP-Gas Service Manual

LP-Gas Service Manual

Download the PDF Here

Requires Adobe PDF Reader

Engineered Controls International, Inc., ECII^Ž, has prepared an LP-Gas Service Manual for use by installation servicemen and others requiring a handy reference for field service work. It deals with subjects that can be useful to field servicemen striving for greater efficiency and safer installations. For the more technical problems and theories, the many texts and manuals concerning the particular subject should be consulted.

This manual is not intended to conflict with federal, state, provincial or local ordinances and regulations. These should be observed at all times.

For a hard copy of this manual, contact your authorized RegO^Ž Products distributor or send a request to Engineered Controls International, Inc., ECIIŽ.

Table of Contents

LP-Gas Basics

Information about LP-Gas

Vapor Pressure of LP-Gas

Installation Planning

Propane Storage Vessels

Determining Total Load

100 lb. DOT Cylinders

ASME Storage Tanks

Purging

Importance of Purging

Correct Procedure for Purging Air

Placement of Cylinders and Tanks

Location of DOT Cylinders

Location of ASME Containers

Pipe and Tubing Selection

Instructions and Examples

Table 1: First Stage Pipe or Copper Tubing Sizing: 10 PSIG Inlet

Table 2: First Stage Pipe or Copper Tubing Sizing: 5 PSIG Inlet

Table 3: First Stage Plastic Tubing Sizing

Table 4: Second Stage, Single Stage, or Integral Twin Stage Pipe or Copper Tubing Sizing