Automatic Changeover Regulators M2523HP Series
Application
The M2523HP series automatic changeover regulators are designed especially for use in systems where a reserve cylinder is used to provide a continuous, uninterrupted supply of gas. These regulators are suitable for use with carbon dioxide, hydrogen, oxygen, industrial air, nitrous oxide, nitrogen, helium and argon.Features
- Automatically withdraws from reserve cylinder after exhausting the “service” cylinder.
- Cylinder pressure gauges let you know at a glance which cylinder is in use. There is no need to shutdown the system to replace empty cylinders.
- Nickel plated.
- 100% Factory Tested
- Cleaned per CGA G-4.1 for oxygen service.
- Porous bronze filters are installed in each inlet to minimize the entry of foreign particles.
- Back pressure check valves are installed in each inlet to help assure positive shut-off in case of reverse flow.
- Each unit comes complete with mounting bracket and a special delivery pressure adjustment wrench.
- Factory set at 50 PSIG on service side. CO2 and N2O regulators are factory set at 100 PSIG on service side.
Body ..................................................Brass
Bonnet ...............................................Brass
Seat Disc (all gases except CO2) ..........Viton
Seat Disc ................(CO2 Only) Butyl Rubber
Diaphragm (all gases except CO2) ...Neoprene
Diaphragm (CO2 Only) ......................Buna N
Handle .........................................Aluminum
Bonnet Spring ......................................Steel
Backcap Spring .....................Stainless Steel
more...