RegO® for cryogenic & industrial gas bulk storage

Innovative design derived from decades of experience to deliver a breadth of line like no other.

RegO is known world-wide for producing high-performing, high-quality flow control products for the safe storage, transport, and dispensing of liquid and gas Oxygen, Nitrogen, Argon, Co2, Hydrogen, and other cryogenic products. Our decades of industry experience have led us to develop innovative products that enable safer storage and faster dispensing, with longer service life, and less maintenance to lower your cost of ownership.

From valves to manifolds, the innovation pipeline is always flowing at RegO.

In the last year RegO has released more than 30 new products—globe and gate valves, check valves, diverters, angled relief valves, regulators, and our expanded offering of standard and custom manifolds. When you partner with RegO, you get 100% tested products, with an industry-leading ten year warranty, backed by a global sales and service team that is knowledgeable and responsive.

There’s only one way to get our quality, long life, and performance—ask for RegO.


RegO Globe Valves

SK Series

Designed for handling cryogenic liquids through trailer, bulk vessels and piping configurations. Our Kold-Seal® stem seal technology assures a tight seal preventing cryogenic gas loss. The conical seat design allows exceptional flow, positive shutoff and less chance of debris accumulation in the flow path, all resulting in an overall longer service life. Maintenance on the packing and seat is quick and easy. Available in butt weld, socket weld, threaded (FNPT) ends.

DATA SHEET

SKB Series

Designed for the handling of cryogenic liquids through trailer, bulk tanks and piping configurations. Our time tested spring loaded stem packing and superior seat design provide for long life and easy maintenance. Internal components are the same for BB Series. Also available in short stem version.

DATA SHEET

BB Series

The BB Series globe valves are designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ISO-containers and piping configurations. Our time-tested, spring-loaded stem packing and superior seat design provide for long life and easy maintenance. Internal components are identical with the SKB Series. The BB Series globe valves are offered with brazed-in schedule 10 and 40 stainless steel pipe stubs. Also available in short stem version.

DATA SHEET


RegO Manifolds

CSM Series

RegO® Goddard high quality welded and welded assemblies are ideal for the manufacturer of original equipment for bulk cryogenic vessels. Using the same technology of our globe valves with SK Series bolt cap, stainless steel bodies and superior works and stainless steel construction pipes are available as a production unit with stainless steel control block and control block brass.

DATA SHEET

RegO Custom Manifold Designs

Save time and overhead by partnering with RegO to build custom manifolds in bulk to your specifications.

CONTACT REGO


RegO Diverter Valves

DV4108 Series

Provides an all stainless steel lightweight, simplified solution for the isolation of pressure relief valves during testing and change out of relief valves and burst discs without requiring evacuation of the vessel and guaranteeing that one port will be available to work during the operation.

DATA SHEET

DV4108SD Series for pressure relief valves

The DV4108SD04 has the inlet port in the upper position for the easy installation of the micro bulk’s relief pressure line, and the four-outlet port oriented at down position to avoid the humidity going into the PRVs and guarantee proper operation.

DATA SHEET

DR6100 Series

Delivers a simple solution for the isolation of pressure relief devices during routine change out of a relief valve and burst discs without evacuating the vessel. Excellent for protecting bulk liquid vessels, transport trailers, industrial pipelines, and LNG systems.

DATA SHEET


RegO Check Valves

886 Series

Designed to prevent back flow in cryogenic systems. Higher fluid capacity (Cv) than poppet or lift check valves. 316L stainless steel investment cast body, cap and arm for high cycle life and superior sealing. This bolted bonnet valve can be permanently installed in the line and services from the top.

DATA SHEET

CV9400 Series

Stainless Steel Lift Check Valves are designed with a spring-loaded piston for bubble-tight sealing performance under cryogenic conditions. Conical seat design provides higher Cv and a bubble-tight sea, one-piece seat assembly prevents possible dislodge of material during vibration. Provides repeatable, lasting performance when exposed to cryogenic liquid.

DATA SHEET

840 Series

Designed to prevent back flow in cryogenic systems, this union bonnet valve has a bronze body and internals—rugged construction for long life and minimal down time. Higher fluid capacity (Cv) than poppet or lift check valves. They can be permanently installed in the line and serviced from the top.

DATA SHEET


RegO Bulk Tank Components

AR Series Angled Relief Valves

The ASME approved 90° relief valves AR Series, provide precise relief set points which protect cryogenic vessels and piping systems for over-pressurization.

DATA SHEET

9400 Series Pressure Relief Valves

Specifically designed for vapor line safety relief applications and cryogenic liquid containers.

DATA SHEET

1300SS Series PRV Riser Tube

Stainless steel body with fine stem threading. Diameters and threading compatibility with all RegO 9400 Series pressure release valves.

DATA SHEET

CMM Series Needle Valves

Ideal for use as a gauge isolation valve or applications requiring accurate throttling of pressure. Fine stem threading and long taper allow precise metering and leak-free shut-off.

DATA SHEET

110 & 322 Series Gate Valves

Designed to withstand the vibration and heavy duty use of liquified and vaporized gas transport, these stainless steel gate valves are rated for clean oxygen use and can be permanently installed in the line and serviced from the top. PCTFE Seat provides a bubble tight seal and is replaceable for fast and easy service. Available in RF flange, butt weld, socket weld, threaded (FNPT) ends.

DATA SHEET

PB504 Series Cryogenic Regulators

Designed to maintain the pressure in cryogenic containers; they may also be used as a line regulator for cryogenic lines and cold gas lines. They are specifically useful in installations where the precision in pressure control and flow capability are important.

DATA SHEET