RegO® Presto-Tap® – Fast, accurate testing for LPG tanks and regulators.

RegO has long championed Presto-Tap, the industry’s only UL-listed LPG pressure test devices, as evidenced by the built-in compatibility found in our LPG tank valves. The full line of Presto-Tap testing products and kits is available at all RegO distributors.

Click Here to Download the new Presto-Tap Regulator Catalog

Presto-Tap testing saves time, lowers costs, and reduces emissions.

As a part of the RegO Ready-To-Go® line, the patented Presto-Tap Leak Detection System (LDS) line of products, offers a safe and efficient way for drivers and service personnel to test for leaks, obtain pressure readings, and confirm the presence of gas in LP tanks.

This easy-to-use system requires no special tools and only minimal training, so your team can easily comply with industry-mandated system leak testing and documentation procedures. Fast, accurate testing to save you time and money.

Calculate your savings here:


Use these quick links to see the complete line of Presto-Tap products for your testing application.


Presto-Tap Tank Pressure Testing Products

Designed to be carried by drivers and service personnel to perform NFPA system leak tests at tank pressure. Quickly and safely tests by attaching to an installed Presto-Tap LDS product, this tool set is especially helpful for testing above ground and underground tank installations.

Compatible test locations include: RegO Ready-To-Go valves with the factory-installed Presto-Tap fitting, valve pressure ports with LDS2000RV installed, Presto-Tap LDS Pigtails, or Tank Pressure Fittings (TPF).

TESTING PROCEDURE 

PT6800-BHX

300 psi liquid glycerin filled ambient temperature gauge w/bleeder valve, straight quick adapter & 36” flex hose w/magnet

DATA SHEET

PT6800-BH90

300 psi liquid glycerin filled ambient temperature gauge w/bleeder valve, 12” flex hose, and 90° quick adapter

DATA SHEET

PT6800-B90

300 psi liquid glycerin filled ambient temperature gauge w/bleeder valve. Shown with 90° quick connector. Available with straight quick adapter. Sold with belt loop holster

DATA SHEET

PT6800-KGA

300 psi liquid glycerin filled ambient temperature gauge w/1/4″ FPT x 1/4″ M flare access & 1/4″ flare cap w/retainer strap, & magnet

DATA SHEET

PT912 Series

Brass pigtails with Presto-Tap fittings. Available in 12”, 20“, and 48” lengths

DATA SHEET

LDS Series

UL-Listed Presto-Tap tank & regulator pressure fitting with 54 Orifice

DATA SHEET

TPF Series

Brass fitting with Presto-Tap port. Install between tank service valve and first stageregulator

DATA SHEET


Presto-Tap First Stage Regulator
Pressure Testing Products

Service personnel can quickly and accurately perform leak testing and determine lock up and flow of first stage regulators with Presto-Tap LDS products installed. Testing can be done after tank pressure has been reduced to approximately 10 psi by the first stage regulator using an LDS2000RV installed in the downstream side of the pressure port of the first stage regulator, or before the second stage regulator using a Presto-Tap LDS2000RV installed in the inlet side of the second stage regulator.

TESTING PROCEDURE

PT30LP-BHX

30 psi liquid glycerin filled ambient temperature gauge w/bleeder valve, w/bleeder valve, 36” flex hose and straight quick adapter

DATA SHEET

PT30LP-BH90

30 psi liquid glycerin filled ambient temperature gauge w/bleeder valve, w/bleeder valve, 12” flex hose and 90° quick adapter

DATA SHEET

PT30LP-90

30 psi liquid glycerin filled ambient temperature gauge w/bleeder valve, w/bleeder valve and 90° quick adapter. Available with straight quick adapter. Sold with belt loop holster

DATA SHEET

PT30LP-KGA

30 psi liquid glycerin filled ambient temperature gauge w/1/4″ FPT x 1/4″ M flare access & 1/4″ flare cap w/retainer strap, & magnet

DATA SHEET


Presto-Tap Low Pressure Regulator
Pressure Testing Products

Designed to perform leak tests on the downstream side of the second stage regulator in either a 2 pound system or 11 inches of water column by connecting quick adapters to Presto Tap LDS2000RV Fittings installed in the low pressure side of a 2nd stage regulator.

TESTING PROCEDURE

2 psi Pressure Testing Products

PT5-BHX

5 psi liquid glycerin filled ambient temperature gauge w/bleeder valve, straight quick adapter & 36” flex hose w/magnet

PT5-BH90

5 psi liquid glycerin filled ambient temperature gauge w/bleeder valve, 12” flex hose, and 90° quick adapter

PT5-90

5 psi liquid glycerin filled ambient temperature gauge w/bleeder valve, w/bleeder valve and 90° quick adapter. Available with straight quick adapter. Sold with belt loop holster

PT5-KGA

5 psi liquid glycerin filled ambient temperature gauge w/1/4″ FPT x 1/4″ M flare access & 1/4″ flare cap w/retainer strap, & magnet

11” Water Column Pressure Testing Products

PTOZ-BHX

35 oz liquid glycerin filled ambient temperature gauge w/bleeder valve, straight quick adapter & 36” flex hose w/magnet

DATA SHEET

PTOZ-BH90

35 oz liquid glycerin filled ambient temperature gauge w/bleeder valve, 12” flex hose, and 90° quick adapter

DATA SHEET

PTOZ-90

35 oz liquid filled glycerin ambient temperature gauge w/bleeder valve, w/bleeder valve and 90° quick adapter. Available with straight quick adapter. Sold with belt loop holster

DATA SHEET

PT0Z-KGA

35 oz liquid glycerin filled ambient temperature gauge w/1/4″ FPT x 1/4″ M flare access & 1/4″ flare cap w/retainer strap, & magnet

DATA SHEET


Universal Service Tech Kits:
Leak detection system diagnostics tools for any application.

The RegO Presto-Tap Universal Service Tech Kit has all the diagnostic tools needed to perform system leak testing at any point of the propane system all in one easy-to-carry bag.

DATA SHEET