RegO® Cryogenic & Industrial Gas Products

RegO cryogenic & industrial gas products are 100% tested and packed with innovations to maximize flow control, reduce the need for service, and lower your cost of ownership. Backed by our industry-leading 10-year warranty, 25-year regulator service life, and global network of technical and sales support, RegO delivers trouble-free performance—and peace of mind.

    Cryogenic Cylinder Equipment

    1/4" Combination Pressure Builder/Economizer

    RegO® CBH502 & CBC502 Series:
    The regulator combines the function of Pressure Building and Economizer functions in one compact unit. Available in Chart and Taylor-Wharton piping geometries and a variety of pressure ratings.

    Economizers

    RegO® ECL502 Series:
    ECL502 series cryogenic economizers are designed to be used as pressure reducing valves to automatically maintain a constant inlet or back pressure, normally closed at pressures below its set point and open at pressures above its set point. The ECL502 is primarily designed to assist in maintaining a desired system pressure ideal for Nitrogen, Oxygen, Argon and other cryogenic cylinder applications with a 100% performance improvement over RegO®’s ECLXXX series. ECL502 series offers outstanding performance for maintaining LNG fuel line pressure.

    Extended Bonnet Valves

    RegO® BK9450 & BK9470 Series:
    For use as a trycock valve or hose drain valve on cryogenic tanks, or as a use, liquid fill, or vent valve on mini-bulk cryogenic tanks. These valves can be used also for other cold gas applications requiring extended stem valves as LNG fueling.

    Liquid Cylinder Regulator

    RegO® LCR Series:
    The RegO® LCR Series pressure reducing regulator assembly controls the pressure from the gas use line or the discharge of any liquid cylinder with a flow capacity at least double the capacity of the cylinder vaporization coil. For use with oxygen, nitrogen, argon, or carbon dioxide liquid cylinders.

    Pressure Builder

    RegO® RG Series:
    RG series cryogenic regulators are primarily designed to maintain pressure on cryogenic liquid within cryogenic containers. They may also be used in cryogenic lines, vaporizer and converter applications. They are especially useful in installations where space and cost limitations are important.

    RegO® Check Valves

    RegO® NG304 Series:
    The NG304 series is specifically designed to prevent backflow (reverse flow) in applications of LNG fuel tanks and LNG facilities. These valves permit the safe refill operation of the LNG tanks and the maintenance process of the fill receptacle, ensure reliable performance at cryogenic temperatures.

    Securing CGA Fittings on Liquid Cylinders

    RegO® RegO®-LOK™ Series:
    The RegO®-LOK™ is designed for installation on the RegO® T9450 and T9460 Series liquid cylinder valves to deter and prevent the removal of the CGA fitting from the valve. The RegO®-LOK™ retains standard CGA outlet connection so unauthorized persons do not remove the fitting. By use of a special one-way bolt, the RegO®-LOK™ is secured to the valve. The RegO®-LOK™ installs in a few minutes with the use of screwdrivers, without valve disassembly, brazing, welding, or drilling. The RegO®-LOK™ deters and prevents fitting removal by gas customers, however allows the replacement of fittings by authorized gas supplier plant personnel.

    Short Stem Cryogenic Valves

    RegO® T9450 Series & T9460 Series:
    The T9450 and T9460 series valves are designed for use on portable cryogenic cylinders and other in-line shut-off valve applications.

    Relief Valves

    Angle Relief Valve, ASME/ Non SAME

    RegO® AR4100 Series:
    The ASME approved 90° relief valves AR Series, provide precise relief set points which protect cryogenic vessels and piping systems for over-pressurization.

    RegO® AR5100 Series:
    The ASME approved 90° relief valves AR Series, provide precise relief set points which protect cryogenic vessels and piping systems for over-pressurization.

    RegO® NG900 Series:
    The NG900 series is designed specifically to avoid over-pressurization in LNG fuel tank applications and LNG installations. The NG900 Series is also compatible with oxygen, nitrogen, argon, helium, and hydrogen. These valves open and close at preset pressures to ensure reliable performance at cryogenic temperatures.

    Brass High Pressure ASME Relief Valves

    RegO® PRV19534K Series:
    The RegO® PRV19534 Series relief valves are designed for CO2 and other industrial gases and for cryogenic service in the vapor space. Apply on piping systems, liquid cylinders or mini-bulk cryogenic containers where an ASME relief valve is required. Compatible with all oxygen, nitrogen, argon, helium, LNG and CO2.

    Carbon Dioxide Relief Valves, ASME

    RegO® UA3149A Series:
    The UA3149A series “pop-type” relief valves are especially designed for use as a secondary relief valve in carbon dioxide transports and stationary storage tanks. The relief valve is designed to protect the tank from excessive over pressure in the event of fire or other emergencies. A small throttling-type primary relief valve must also be provided to control boil-off and maintain tank pressure. Provisions must be made to prevent the accumulation and build-up of water and foreign material in the valve by use of protective cap included.

    Gas Relief Valves, ASME

    RegO® B-19434B Series:
    The B-19434B Series relief valves are suitable for use with oxygen and non corrosive industrial gases, such as nitrogen, argon and helium.

    RegO® C-19434B Series:
    The C-19434B series relief valves are designed for use in carbon dioxide service.

    RegO® PRV19430 & PRV29430 Series:
    The 19430 and 29430 relief valves are designed for oxygen and other industrial gases and for cryogenic service in the vapor space. Apply on piping systems, liquid cylinders or mini-bulk cryogenic containers where an ASME relief valve is required.

    Gas Relief Valves, Non-ASME

    RegO® 9400 Series:
    9400 series relief valves are specifically designed for vapor line safety relief applications and cryogenic liquid containers.

    RegO® Multiport® Pressure Relief Valve Manifold Assemblies For Large CO2 Containers

    RegO® ASME UA8560, UA8570 Series:
    Designed especially for use as a primary relief device on large stationary pressurized storage containers with flanged openings. These manifolds incorporate an additional relief valve, not included in the flow rating, allowing for servicing or replacement of any one of the relief valves without evacuating the container. The handwheel on the manifold selectively closes off the entrance port to the relief valve being removed while the remaining relief valves provide protection for the container and its contents. All manifold flow ratings are based on flow through the relief valves after one has been removed for service or replacement.

    Noise Reduction Relief Valve

    RegO® NR Series:
    Designed especially for indoor applications such as laboratories where relief valve discharge noise is an issue. RegO®’s NR series PRV provides excellent flow characteristics with a 50% reduction in outlet noise related to relief valve.

    RegO® NRF9430 Series:
    For use with cryogenic liquid cylinders to provide substantial reduction of discharge noise in sensitive environments. Our patent pending design allows for an efficient and environmentally friendly flow path.

    Diverters

    Bulk Vessel Safety Assembly – Relief Valve & Diverter

    RegO® DA6200 Series:
    RegO® provides a complete unitized solution for pressure relief devices assembled in a factory setting ready for attachment to cryogenic bulk tanks. Ideal for OEM applications where pre-fabricated assemblies are favored to streamline construction. Excellent for protecting bulk liquid vessels, transport trailers, industrial pipelines and LNG systems.

    Brass Diverter (3-Way) Valve

    RegO® DR6100 Series:
    The DR Diverter Valve Series provides a simple solution for the isolation of pressure relief devices during routine change out of a relief valve and burst discs without evacuating the vessel. Excellent for protecting bulk liquid vessels, transport trailers, industrial pipelines, and LNG systems.

    Stainless Steel Diverter (3-Way) Valve

    RegO® DV4108 Series:
    The DV4108 Diverter Valve Series provides a lightweight, simplified solution for the isolation of pressure relief valves during testing and change out of relief valves and burst discs without requiring evacuation of the vessel and guaranteeing that one port will be available to work during the operation. This all stainless steel diverter valve is ideal for use with oxygen, nitrogen, krypton, carbon dioxide, nitrous oxide, dinitrogen monoxide, carbon oxide, methane, ethane, ethylene, argon, and LNG.

    RegO® DV4108SD Series for PRVs:
    The DV4108SD04 Diverter Valve Series provides a lightweight, simplified solution for the isolation of pressure relief valves during testing and change out of pressure relief valves and burst discs without requiring evacuation of the vessel and guaranteeing that one port will be available to work during the operation. This all stainless steel diverter valve is ideal for use with oxygen, nitrogen, krypton, carbon dioxide, nitrous oxide, dinitrogen monoxide, carbon oxide, methane, ethane, ethylene, argon, and LNG.

    Globe Valves

    Stainless Steel Globe Valves

    RegO® SK Advantage Series Long Stem Series:
    The SK Advantage Series of Stainless Steel Globe Valves are designed for handling cryogenic liquids through trailer, bulk vessels and piping configurations. Ideal service medium includes oxygen, nitrogen, krypton, carbon dioxide, dinitrogen monoxide, carbon dioxide, methane, ethane, ethylene, argon and LNG . Our Kold-Seal™ stem seal technology assures a tight seal preventing cryogen gas loss. The conical seat design allows exceptional flow, positive shutoff and less chance of debris accumulation in the flow path, all resulting in an overall longer service life. Maintenance on the packing and seat is quick and easy.

    RegO® SK Advantage Series Short Stem:
    The SKS Series globe valves short stem are designed for handling of vapor phase and cryogenic liquids through bulk tanks, trucks, trailers, ISO-containers and piping configurations. Our time tested spring loaded stem packing and superior seat design provide for long life and easy maintenance. Recommended for vapor phase and intermittent cryogenic liquid use.

    RegO® SK Advantage Series Medium Stem:
    The SK Advantage Series of Stainless Steel Globe Valves are designed for handling cryogenic liquids through trailer, bulk vessels and piping configurations. Ideal service medium includes oxygen, nitrogen, krypton, carbon dioxide, dinitrogen monoxide, carbon oxide, methane, ethane, ethylene, argon and LNG . Our Kold-Sea™l stem seal technology assures a tight seal preventing cryogen gas loss. The conical seat design allows exceptional flow, positive shutoff and less chance of debris accumulation in the flow path, all resulting in an overall longer service life. Maintenance on the packing and seat is quick and easy.

    RegO® SK Advantage Series Long Stem Threaded Connection Series:
    The SK Advantage Series of Stainless Steel Globe Valves are designed for handling cryogenic liquids through trailer, bulk vessels and piping configurations. Ideal service medium includes oxygen, nitrogen, krypton, carbon dioxide, dinitrogen monoxide, carbon dioxide, methane, ethane, ethylene, argon and LNG . Our Kold-Seal™ stem seal technology assures a tight seal preventing cryogen gas loss. The conical seat design allows exceptional flow, positive shutoff and less chance of debris accumulation in the flow path, all resulting in an overall longer service life. Maintenance on the packing and seat is quick and easy.

    RegO® SK Advantage Series Medium Stem Threaded Connection Series:
    The SK Advantage Series of Stainless Steel Globe Valves are designed for handling cryogenic liquids through trailer, bulk vessels and piping configurations. Ideal service medium includes oxygen, nitrogen, krypton, carbon dioxide, dinitrogen monoxide, carbon oxide, methane, ethane, ethylene, argon and LNG . Our Kold-Seal™ stem seal technology assures a tight seal preventing cryogen gas loss. The conical seat design allows exceptional flow, positive shutoff and less chance of debris accumulation in the flow path, all resulting in an overall longer service life. Maintenance on the packing and seat is quick and easy.

    RegO® SK Advantage Series Short Stem Threaded Connection Series:
    The SKS Series globe valves short stem are designed for handling of vapor phase and cryogenic liquids through bulk tanks, trucks, trailers, ISO-containers and piping configurations. Our time tested spring loaded stem packing and superior seat design provide for long life and easy maintenance. Recommended for vapor phase and intermittent cryogenic liquid use.

    RegO® SK Advantage Series Long Stem, Inlet Socket Weld, Outlet Threaded NPT Series:
    The SK Advantage Series of Stainless Steel Globe Valves are designed for handling cryogenic liquids through trailer, bulk vessels and piping configurations. Ideal service medium includes oxygen, nitrogen, krypton, carbon dioxide, dinitrogen monoxide, carbon dioxide, methane, ethane, ethylene, argon and LNG . Our Kold-Seal™ stem seal technology assures a tight seal preventing cryogen gas loss. The conical seat design allows exceptional flow, positive shutoff and less chance of debris accumulation in the flow path, all resulting in an overall longer service life. Maintenance on the packing and seat is quick and easy.

    RegO® SK Advantage Series Medium Stem, Inlet Socket Weld, Outlet Threaded NPT Series:
    The SK Advantage Series of Stainless Steel Globe Valves are designed for handling cryogenic liquids through trailer, bulk vessels and piping configurations. Ideal service medium includes oxygen, nitrogen, krypton, carbon dioxide, dinitrogen monoxide, carbon oxide, methane, ethane, ethylene, argon and LNG . Our Kold-Seal™ stem seal technology assures a tight seal preventing cryogen gas loss. The conical seat design allows exceptional flow, positive shutoff and less chance of debris accumulation in the flow path, all resulting in an overall longer service life. Maintenance on the packing and seat is quick and easy.

    RegO® SK Advantage Series Short Stem, Inlet Socket Weld, Outlet Threaded NPT Series:
    The SKS Series globe valves short stem are designed for handling of vapor phase and cryogenic liquids through bulk tanks, trucks, trailers, ISO-containers and piping configurations. Our time tested spring loaded stem packing and superior seat design provide for long life and easy maintenance. Recommended for vapor phase and intermittent cryogenic liquid use.

    RegO® 210 Series:
    Our investment cast stainless steel is specified by leading industrial gas companies for storage tank and yard operations. Special order bonnet extensions are available for cold box applications. Valves for hydrogen use can be supplied

    RegO® 231 Series:
    The RegO® Goddard 231 Series Stainless Steel globe valves are designed for handling of cryogenic liquids through bulk tanks, trailers, ASU plants and piping configurations. Compatible with oxygen, nitrogen, CO2, hydrogen, helium and argon.

    RegO® 232 Series:
    The RegO® Goddard 232 Series Stainless Steel globe valves are designed for handling of cryogenic liquids through bulk tanks, trailers, ASU plants and piping configurations. Compatible with oxygen, nitrogen, CO2, helium and argon.

    Stainless Steel Angle Globe Valves

    RegO® SKA Advantage Series:
    RegO®/Goddard stainless steel angle globe valves are designed for handling cryogenic liquids. Designed for fill manifolds applications of bulk tanks. RegO® Kold-Seal™ stem seal technology assures a tight seal preventing gas loss. The conical seat design allows exceptional flow, positive shut off and less chance of debris accumulation in the flow path—resulting in an overall longer service life. Maintenance on the packing and seat is quick and easy. Ideal service medium includes oxygen, nitrogen, argon, carbon dioxide, nitrous oxide, methane, ethane, ethylene, krypton, and LNG.

    Brass Angle Globe Valves

    RegO® B-226BLA:
    RegO®/Goddard brass angle globe valves are designed for handling cryogenic liquids. Designed for fill manifolds applications of bulk tanks. RegO® Kold-Seal™ stem seal technology assures a tight seal preventing gas loss. Maintenance on the packing and seat is quick and easy. Ideal service medium includes oxygen, nitrogen, argon, carbon dioxide, nitrous oxide, methane, ethane, ethylene, krypton, and carbon oxide.

    Bronze Globe Valve

    RegO® 202X Series Including 206LL, 206GF, 206ULL, 206BLL:

    RegO® 222 Series Including 226LL, 226GF, RegO® 226ULL, 226BLL, 222X, 226LL, 226BLL:
    The 222 Series valves are designed exclusively for the handling of cryogenic liquids on bulk storage tanks, transports, and pipelines. These globe valves provide positive shutoff and offer a long, low-maintenance service life. The valves are available with a variety of inlet and outlet connections and stem lengths.

    RegO® BB Series:
    The BB Series globe valves are designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ISO-containers and piping configurations. Our time tested spring loaded stem packing and superior seat design provide for long life and easy maintenance. Internal components are identical with the SKB Series. The BB Series globe valves are offered with brazed-in schedule 10 and 40 stainless steel pipe stubs. Also available in short stem version.

    Bronze Globe Valve Short Stem

    RegO® BBS Series:
    The BB Series globe valves are designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ISO-containers and piping configurations. Our time tested spring loaded stem packing and superior seat design provide for long life and easy maintenance. Internal components are identical with the SKB Series.

    Bronze Globe Valve with Pipe Ends

    RegO® BB Series With Pipe Ends:
    The BB Series globe valves with pipe ends are designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ISO containers and piping configurations. Our time tested spring loaded stem packing and superior seat design provide for long life and easy maintenance. Internal components are identical with the SKB Series.

    Bronze/Stainless Steel Body Globe Valve

    RegO® SKB Series:
    The SKB Series globe valves are designed for the handling of cryogenic liquids through trailer, bulk tanks and piping configurations. Our time tested spring loaded stem packing and superior seat design provide for long life and easy maintenance. Internal components are the same for BB Series. Also available in short stem version.

    Extended Bonnet Cryogenic Globe Valves

    RegO® BK and BKA Series Valves:
    The BK and BKA Series valves are designed exclusively for the handling of cryogenic liquids on bulk storage tanks, transports, and pipelines. These globe valves provide positive shutoff and offer a long, low-maintenance service life. The valves are available with a variety of inlet and outlet connections and stem lengths. Certain BK valves are offered with brazed-in schedule 5 and schedule 10 Stainless Steel Pipe Stubs.

    RegO® - Goddard Bronze/Stainless Steel Body Globe Valve Short Stem SKB Series

    RegO® Short Stem SKB Series:
    The SKB Series globe valves short stem are designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ISO-containers and piping configurations. Our time tested spring loaded stem packing and superior seat design provide for long life and easy maintenance. Internal components

    Manifolds

    Cryogenic Fill Manifold

    RegO® CFM, AFM & PFM Series:
    RegO® Goddard high quality brazed and welded assemblies are ideally suited for the original equipment manufacturer of bulk cryogenic vessels. A wide variety of valve types including union or bolted bonnet, bronze bodies & top works and piping of stainless steel or copper construction are available as production unit.

    RegO® CSB & CSM Series:
    RegO® Goddard high quality welded and welded assemblies are ideal for the manufacturer of original equipment for bulk cryogenic vessels. Using the same technology of our globe valves with SK Series bolt cap, stainless steel bodies and superior works and stainless steel construction pipes are available as a production unit with stainless steel control block and control block brass. Ideal for all cryogenic liquids including Liquefied Nitrogen, Oxygen Argon, and CO2. Safe and reliably used in LNG Systems. In addition, RegO® can custom design configurations that are welded and brazed in a factory setting.

    Gate Valves

    Bronze Gate Valves

    RegO® 302, 306, 310 & 310X Series:
    The RegO® Goddard 302, 306, 310, & 310X Series gate valves are designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ASU plants and piping configurations. Compatible with oxygen, nitrogen, CO2, and argon.

    Extended Bonnet Bronze Gate Valve

    RegO® 322 and 326 Series:
    The RegO® Goddard 322 and 326 Series gate valves are designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ASU plants and piping configurations. Compatible with oxygen, nitrogen, CO2, and argon.

    Stainless Steel Gate Valve

    RegO® 110 Series:
    RegO® Goddard gate valves are designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ASU plants and piping configurations. Compatible with oxygen, nitrogen, CO2, argon and LNG.

    RegO® 110WHZ Series:
    RegO® Goddard gate valves are designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ASU plants and piping configurations. Compatible with oxygen, nitrogen, CO2, argon and LNG.

    RegO® LOX Series:
    RegO® LOX Series gate valves are designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ASU plants and piping configurations. Compatible with oxygen, nitrogen, CO2, argon and LNG. Specifically designed for liquid oxygen (LOX) service.

    Check Valves

    Stainless Steel Spring-Loaded Piston Lift Check Valves

    RegO® CV9400 Series:
    The CV9400 Series of Stainless Steel Lift Check Valves are designed with a spring-loaded piston for installation in various piping configurations in liquid cryogenic applications, including bulk tanks, trailers and ISO tanks. Ideal service medium includes oxygen, nitrogen, krypton, carbon dioxide, nitrous oxide, dinitrogen monoxide, carbon oxide, methane, ethane, ethylene, argon, and LNG.

    Stainless Steel Swing Check Valve

    RegO® 886 Series:
    The RegO® Goddard 886 Series check valve is designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ISO-containers and piping configurations. Compatible with oxygen, nitrogen, CO2 argon and LNG.

    Bronze Swing Check Valve

    RegO® 846M Goddard 840 Series:
    The RegO® Goddard 846M and 840 series check valve is designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ISO-containers and piping configurations. Compatible with oxygen, nitrogen, CO2, argon and LNG.

    Check Valves

    RegO® NG304 Series:
    The NG304 series is specifically designed to prevent backflow (reverse flow) in applications of LNG fuel tanks and LNG facilities. These valves permit the safe refill operation of the LNG tanks and the maintenance process of the fill receptacle, ensure reliable performance at cryogenic temperatures.

    Flanged Internal Valves for Bobtail Delivery Trucks, Transports and Large Stationary Storage Containers

    RegO® TA3217 Series:
    Designed primarily for CO2 filling and/or withdrawal on bobtail delivery trucks, transports and stationary storage tanks with flanged pumps or piping. Installation is quick and easy, and the valve may be operated manually by cable or pneumatically. Lever available on right or left side to allow for installation without the use of an extra pulley.

    Horizontal Lift Check Valves

    RegO® 8500 Series:
    8500 series valves are designed for use as a check valve on cryogenic bulk stations and pipelines.

    Inline Check Valves

    RegO® CG Series Gas and Cryogenic Check Valves:
    Inline check valves with metal seat option for cryogenic service or with soft seat option for leak free operation in gas service.

    Regulators

    Aluminum Pressure Regulators

    RegO® 1682M Series & C-1682M Series:
    The 1682M Series Regulators are designed primarily for second stage regulation of a variety of gases in industrial and hospital piping systems and manifolds. The C-1682M Series is specifically designed for use with Carbon Dioxide.

    Automatic Changeover Regulators

    RegO® M2523HP Series:
    M2523HP series automatic changeover regulators are designed especially for use in systems where a reserve cylinder is used to provide a continuous, uninterrupted supply of gas. These regulators are suitable for use with carbon dioxide, hydrogen, oxygen, industrial air, nitrous oxide, nitrogen, helium and argon.

    Cryogenic 1/2" Combination Pressure Builder/Economizer for Bulk Vessels

    RegO® CB504 Series:
    Obsolete

    RegO® CBE504 Series:
    CBE504 series regulators maintain the pressure of the cryogenic vessels (Bulk Tanks or Micro bulks) during the operation or usage. The pressure building and economizer function are both combined in one unit, saving space and weight on the tank, simplifying the tank plumbing and reducing the leakage points.

    Cryogenic 1/2" Pressure Builder

    RegO® PB504 Series:
    PB series cryogenic regulators are primarily designed to maintain the pressure in cryogenic containers; they may also be used as a line regulator for cryogenic lines and cold gas lines. They are specifically useful in installations where the precision in pressure control and flow capability are important. For use with oxygen, nitrogen, argon, LNG and CO2.

    Heavy Duty Brass Final Line Pressure Regulator

    RegO® BR-1780 Series:
    BR-1780 Series Regulators are designed for final line pressure regulation on medical oxygen systems. They are equally suitable for a variety of gases in medical or industrial applications. The BR-1780 Series Regulators have a balanced seat, are constructed with oxygen compatible materials, and offer a tamper resistant adjustment screw cap. Flow performance is impressive as well offering up to 30,000 SCFH for the ¾” and 1” model and up to 20,000 SCFH for the ½” model. Compatible with oxygen, nitrogen, argon, hydrogen, helium, CO2, and LNG.

    Heavy Duty Gas Line Regulator

    RegO® 1780 Series:
    The 1780 Series Regulators are designed for final line pressure regulation on gas distribution systems. They are suitable for a variety of gases in medical or industrial applications. The 1780 Series Regulators have a balanced seat, are constructed with oxygen compatible materials, and have the same valve design, brass body, and internal parts as the premium BR-1780 Series. Flow performance is equal to the BR-1780 Series. Compatible with oxygen, nitrogen, argon, hydrogen, helium, CO2, and LNG.

    High Pressure Gas Regulator

    RegO® 4200 Series:
    4200 Series high-pressure regulators are designed especially for use in high-pressure cylinders and are used to provide the supply of gas. These regulators are suitable for use with industrial air, nitrogen, helium, and argon.

    Inertrol Outfits

    RegO® 4286 Series, 4289 Series & 4291 Series:
    The 4286, 4289, and 4291 series Inertrol outfits are three stage nitrogen regulators especially designed to maintain oil filled transformer atmospheres at 0.5 psig (.03 barg). Each Inertrol outfit consists of a two-stage regulator connected in series to a highly sensitive single-stage regulator which maintains the 0.5 psig (.03 barg) pressure. A built-in pressure relief valve in the third stage regulator helps protect against over-pressurization of the system. Inertrol units are designed for oil-filled transformers manufactured by ABB, Inc., General Electric, and Cooper Power. Some outfits are equipped with an alarm switch that activates a customer equipped warning device should the cylinder pressure drop below 300 psig (20 barg) .

    Low Pressure Line Regulators

    RegO® 4403 Series:
    The 4403 series regulators provide very sensitive control of a variety of gases at low pressures. The large molded diaphragm assures responsive regulation with inlet pressures up to 250 psig.

    Low Pressure Regulators

    RegO® LV4286-10 Series & LV4289-10 Series:
    The LV4286 and LV4289 series Inertrol third-stage low pressure regulators are designed especially for secondary regulation of gaseous nitrogen on electrical transformer systems. Factory preset at 14” to 15” water column delivery pressure with an inlet pressure of 5 to 10 psig.

    Master High Pressure Valves

    High Pressure Gas Master Valves

    RegO® HP9560 Series:
    The HP9560 Series high pressure brass valves are used on cylinder filling panels, tube trailers, and high pressure manifolds and piping systems. The HP9560 Series exhibits a very low operating torque under pressure for ease of manual operation.

    Line Station Valves

    RegO® 7160 Series:
    7160 series valves are designed for use with oxygen and all fuel gases at station outlets of line distribution systems such as welder’s benches, cutting stations, hospital rooms, etc.

    Adapters, Nipples, Pipe & Miscellaneous

    Brass Adapters Male x Female

    RegO® 489,1252,2165 Series Brass Adapters Male x Female:

    Brass Adapters Female x Female

    RegO® 1125, 1044 Series Brass Adapters Female x Female:

    Brass Adapters Male x Male

    RegO® 1300, 1200,2233 Series Brass Adapters Male x Male:

    Brass Crosses

    RegO® 1225, 1045, 2222 Series Brass Crosses:

    Brass Elbows

    RegO® 1228, 1043, 2233 Series Brass Elbows:

    Brass Outlet Cap and Chain Assemblies

    RegO® Brass Outlet Cap and Chain Assemblie Series:
    Gauges are available in a variety of popular pressure ranges for gas plant applications. Gauges should be selected so that the maximum working pressure of the particular system represents 66% to 75% of the maximum gauge reading. Greater safety and accuracy may be realized by following these guidelines.

    Brass Pipe & Pipe Nipples

    RegO® 1050, 1025, 1050,1075 Series Brass Pipe & Pipe Nipples:
    Heavy-duty, yellow brass pipe and pipe nipples are designed with a high quality, seamless thick wall construction. They are suitable for use in most industrial piping applications.

    Brass Pipe Caps

    RegO® CAP750, CAP1000, CAP1500, CAP2000 Series Brass Pipe Caps:
    For capping cryogenic tank piping or gas pipelines.

    Brass Plugs

    RegO® 1289, 2523HP-7, S1679, 15578, 5562C Series Brass Plugs:
    Heavy-duty, yellow brass pipe and pipe nipples are designed with a high quality, seamless thick wall construction. They are suitable for use in most industrial piping applications.

    Brass Tees

    RegO® 1227, 1042, 4608, 2118, 2223 Series Brass Tees:

    Brass Union Connection Nuts

    RegO® 1302, 1272, 1371, 2223 Series Brass Union Connection Nuts:

    Candy Cane Riser Tubes and Assemblies For Piping-Away PRV9400, SS9400, PRV19400 & PRV29400 Series Relief Valves from Cryogenic Piping

    RegO® PRV19400 & PRV29400 Series Relief Valves:

    CGA Brass Tailpieces

    RegO® 2603-2U Series:

    Miscellaneous Brass Tailpieces

    RegO® 2233-3A, 2670-35 Series Miscellaneous Brass Tailpiece:

    Needle Valves

    RegO® CMM250 Series and CFF250 Series:
    Ideal for use as a gauge isolation valve or applications requiring accurate throttling of pressure or in bulk vessel gauging lines .

    Pressure Gauges

    RegO® 1286,2523HP-7, S1679, 15578,5562C Series Pressure Gauges:
    Gauges are available in a variety of popular pressure ranges for gas plant applications. Gauges should be selected so that the maximum working pressure of the particular system represents 66% to 75% of the maximum gauge reading. Greater safety and accuracy may be realized by following these guidelines.

    Quikonnect Vacuum Couplings

    RegO® Quikonnect Vacuum Couplings Series:
    An extensive range of tube sizes available. Most sizes nest and can be used as reducers in combination with one another.

    RegO® Brass Adapters CGA x Misc. Series

    RegO® 1877C, 1877D Brass Adapters CGA x Misc. Series:

    Strainer

    RegO® STR002P Series:
    The STR002P strainers have been designed to retain debris and any other pollution that could be in the lines, and could affect the performance of regulators and other devices. The STR002P use a Monel filter material. Designed for the handling of cryogenic liquids through bulk tanks, trucks, trailers, ISO-containers and piping configurations.

    Choose your Repair Kit Category:

    Cryogenic Cylinder Equipment

    1/4" Combination Pressure Builder/Economizer

    RegO® CBH502 & CBC502 Series
    The regulator combines the function of Pressure Building and Economizer functions in one compact unit. Available in Chart and Taylor-Wharton piping geometries and a variety of pressure ratings.
    REPAIR KIT PART NUMBER(S): CB502-80, CB502-80A
    DATA SHEET   |   REPAIR KIT

    Economizers

    RegO® ECL502 Series
    ECL502 series cryogenic economizers are designed to be used as pressure reducing valves to automatically maintain a constant inlet or back pressure, normally closed at pressures below its set point and open at pressures above its set point. The ECL502 is primarily designed to assist in maintaining a desired system pressure ideal for Nitrogen, Oxygen, Argon and other cryogenic cylinder applications with a 100% performance improvement over RegO®’s ECLXXX series. ECL502 series offers outstanding performance for maintaining LNG fuel line pressure.
    REPAIR KIT PART NUMBER(S): ECL502-80, ECL502-80, ECL502-80A, ECL-80 ECL-83
    DATA SHEET   |   REPAIR KIT

    Extended Bonnet Valves

    RegO® BK9450 & BK9470 Series
    For use as a trycock valve or hose drain valve on cryogenic tanks, or as a use, liquid fill, or vent valve on mini-bulk cryogenic tanks. These valves can be used also for other cold gas applications requiring extended stem valves as LNG fueling.
    REPAIR KIT PART NUMBER(S): BK-9450-KIT***
    DATA SHEET   |   REPAIR KIT

    Liquid Cylinder Regulator

    RegO® LCR Series
    The RegO® LCR Series pressure reducing regulator assembly controls the pressure from the gas use line or the discharge of any liquid cylinder with a flow capacity at least double the capacity of the cylinder vaporization coil. For use with oxygen, nitrogen, argon, or carbon dioxide liquid cylinders.
    REPAIR KIT PART NUMBER(S): RG-81**, RG-81A**, RG-82
    DATA SHEET   |   REPAIR KIT

    Pressure Builder

    RegO® RG Series
    RG series cryogenic regulators are primarily designed to maintain pressure on cryogenic liquid within cryogenic containers. They may also be used in cryogenic lines, vaporizer and converter applications. They are especially useful in installations where space and cost limitations are important.
    REPAIR KIT PART NUMBER(S): RG-80*, RG-80A*, RG-81**, RG-81A**
    DATA SHEET   |   REPAIR KIT

    Short Stem Cryogenic Valves

    RegO® T9450 Series & T9460 Series
    The T9450 and T9460 series valves are designed for use on portable cryogenic cylinders and other in-line shut-off valve applications.
    REPAIR KIT PART NUMBER(S): ES8450R, BK9450-80 BK9450R**, BKA8400R, BKA8400R, T9464-80, T9464-80B, T9464-80R
    DATA SHEET   |   REPAIR KIT

    Globe Valves

    Stainless Steel Globe Valves

    RegO® 210 Series
    Our investment cast stainless steel is specified by leading industrial gas companies for storage tank and yard operations. Special order bonnet extensions are available for cold box applications. Valves for hydrogen use can be supplied
    REPAIR KIT PART NUMBER(S): S-210-8-81, S-210WHZ-8-81, S-210-8-82, S-210-8-83, S-210WHZ08-853, S-210WHZ-8-82, S-210WHZ-8-83, S-210WHZ-9-84, S-210-16-81, S-210-16-82, S-210-16-83, S-210WHZ-16-81, S-210WHZ-16-82, S-210-32-81, S-210WHZ16-853, S-210-24-81, S-210-24-82, S-210-24-83, S-210-32-82, S-210-32-83
    DATA SHEET   |   REPAIR KIT

    RegO® 231 Series
    The RegO® Goddard 231 Series Stainless Steel globe valves are designed for handling of cryogenic liquids through bulk tanks, trailers, ASU plants and piping configurations. Compatible with oxygen, nitrogen, CO2, hydrogen, helium and argon.
    REPAIR KIT PART NUMBER(S): S-231-4-81, S-231-8-81, S-231-12-81, S-231-4-82, S-231-8-82, S-231-12-82, S-231-4-83, S-231-8-83, S-231-12-83, S-231-4-85, S-231-8-85, S-231-12-85
    DATA SHEET   |   REPAIR KIT

    RegO® 232 Series
    The RegO® Goddard 232 Series Stainless Steel globe valves are designed for handling of cryogenic liquids through bulk tanks, trailers, ASU plants and piping configurations. Compatible with oxygen, nitrogen, CO2, helium and argon.
    REPAIR KIT PART NUMBER(S): S-232-4-81, S-232-8-81, S-232-12-81, S-232-4-82, S-232-8-82, S-232-12-82, S-232-4-83, S-232-8-83, S-232-12-83, S-232-4-85, S-232-8-85, S-232-12-85
    DATA SHEET   |   REPAIR KIT

    Stainless Steel Angle Globe Valves

    RegO® SKA Advantage Series
    RegO®/Goddard stainless steel angle globe valves are designed for handling cryogenic liquids. Designed for fill manifolds applications of bulk tanks. RegO® Kold-Seal™ stem seal technology assures a tight seal preventing gas loss. The conical seat design allows exceptional flow, positive shut off and less chance of debris accumulation in the flow path—resulting in an overall longer service life. Maintenance on the packing and seat is quick and easy. Ideal service medium includes oxygen, nitrogen, argon, carbon dioxide, nitrous oxide, methane, ethane, ethylene, krypton, and LNG.
    REPAIR KIT PART NUMBER(S): SKM009408-AJ, SKM009408-J, SKM009408-Kit, SKM009412-AJ, SKM009412-J, SKM009412-Kit
    DATA SHEET   |   REPAIR KIT

    Brass Angle Globe Valves

    RegO® B-226BLA
    RegO®/Goddard brass angle globe valves are designed for handling cryogenic liquids. Designed for fill manifolds applications of bulk tanks. RegO® Kold-Seal™ stem seal technology assures a tight seal preventing gas loss. Maintenance on the packing and seat is quick and easy. Ideal service medium includes oxygen, nitrogen, argon, carbon dioxide, nitrous oxide, methane, ethane, ethylene, krypton, and carbon oxide.
    REPAIR KIT PART NUMBER(S): B-226BLL-12-81, B-226BLL-12-82, B-226BLL-12-83, B-226BLL-12KIT
    DATA SHEET   |   REPAIR KIT

    Bronze Globe Valve

    RegO® 202X Series Including 206LL, 206GF, 206ULL, 206BLL
    REPAIR KIT PART NUMBER(S): B-202X-8-81, B-202X-12-81, B-202X-16-81, B-202X-8-82, B-202X-12-82, B-202X-16-82, B-202X-8-83, B-202X-12-83, VB-206GF-4-83, B-202X-16-83, B-202X-4KIT, B-202X-8KIT, B-202X-12KIT, VB-206GF-2-83, B-202X-16KIT, VB-206GF-2-81, VB-206GF-4-81, VB-206GF-6-81, VB-206GF-8-81, VB-206GF-2-82, VB-206GF-6-82, B-206GF-12-85, VB-206GF-4-82, VB-206GF-8-82, VB-206GF-12-82, VB-206GF-8-83, VB-206GF-16-82, B-206LL-8KIT, B-206LL-4KIT, VB-206GF-6-83, VB-206GF-12-83, VB-206GF-16-83, B-206GF-02-85, B-206GF-04-85, B-206GF-06-85, B-206GF-16-85, B-206ULL-12KIT, B-206ULL-16KIT, B-206BLL-12KIT
    DATA SHEET   |   REPAIR KIT

    RegO® 222 Series Including 226LL, 226GF, RegO® 226ULL, 226BLL, 222X, 226LL, 226BLL
    The 222 Series valves are designed exclusively for the handling of cryogenic liquids on bulk storage tanks, transports, and pipelines. These globe valves provide positive shutoff and offer a long, low-maintenance service life. The valves are available with a variety of inlet and outlet connections and stem lengths.
    REPAIR KIT PART NUMBER(S): B-222X-12-82, B-222X-4-81, B-226BLL-12KIT, B-226BLL-16KIT, B-226BLL-16-83, B-226BLL-12-83, B-226BLL-16-82, B-226LL-8KIT, B-226LL-4-82, B-226LL-8-81 B-226LL-4-81, B-222X-24KIT, B-226LL-4KIT, B-222X-6KIT B-222X-16-83, B-222X-8-83, B-222X-6-83 B-222X-4-83 B-222X-24-82, B-226BLL-12-82, B-222X-12KIT, B-226BLL-12-81 B-226BLL-16-81, VB-226XGF-12KIT, VB-226XGF-8KIT, B-222X-16-82, B-222X-6-81, B-222X-4-82, B-222X-16-81, B-222X-8-81, B-222X-12-81, B-222X-24-81, B-222X-6-82, B-222X-8-82, B-222X-12-83, B-222X-24-83, B-222X-24-84, B-222X-4KIT, B-222X-16KIT, B-222X-8KIT, B-226LL-8-82, B-226LL-4-83, B-226LL-8-83, B-226LL-4-85, B-226ULL-12-81, B-226ULL-12-82, B-226ULL-16-81, B-226ULL-16-82, B-226ULL-12-83, B-226ULL-16-83, B-226ULL-12KIT, B-226ULL-16KIT, VB-226XGF-4-81, VB-226XGF-6-81, VB-226XGF-8-81, VB-226XGF-12-81, VB-226XGF-4-82, VB-226XGF-8-82, VB-226XGF-6-82, VB-226XGF-12-82, VB-226XGF-12-83, VB-226XGF-4-83, VB-226XGF-6-83, VB-226XGF-8-83, VB-226XGF-4KIT, VB-226XGF-6KIT
    DATA SHEET   |   REPAIR KIT

    RegO® BB Series
    The BB Series globe valves are designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ISO-containers and piping configurations. Our time tested spring loaded stem packing and superior seat design provide for long life and easy maintenance. Internal components are identical with the SKB Series. The BB Series globe valves are offered with brazed-in schedule 10 and 40 stainless steel pipe stubs. Also available in short stem version.
    REPAIR KIT PART NUMBER(S): SK9404-81*, SK9404-82*, SK9408-82*, SK9408-81*, SK9408-83*, BB9408-85, BB9412-83A***, BB9412-85**, BB9412-85A***, BB9412-81A***, SK9416-81*, SK9416-82*, SK9416-83*, BB9416-85
    DATA SHEET   |   REPAIR KIT

    Bronze Globe Valve Short Stem

    RegO® BBS Series
    The BB Series globe valves are designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ISO-containers and piping configurations. Our time tested spring loaded stem packing and superior seat design provide for long life and easy maintenance. Internal components are identical with the SKB Series.
    REPAIR KIT PART NUMBER(S): BBS9404-81, BB9404-85, SK9412-83*, SK9408-82*, SK9408-81*, SK9408-83*, BB9412-82A***, BB9412-83A***, BB9412-85**, BB9412-85A***, BBS9412-85A***
    DATA SHEET   |   REPAIR KIT

    Bronze/Stainless Steel Body Globe Valve

    RegO® SKB Series
    The SKB Series globe valves are designed for the handling of cryogenic liquids through trailer, bulk tanks and piping configurations. Our time tested spring loaded stem packing and superior seat design provide for long life and easy maintenance. Internal components are the same for BB Series. Also available in short stem version.
    REPAIR KIT PART NUMBER(S): BBS9408-85, SK9408-81*, SK9408-82*, SK9408-83*, BB9408-85, BBS9408-81, BBS9408-85, SK9412-81*, BB9412-82A***, SK9412-83*, BB9412-83A***, BB9412-85**, BB9412-85A***, BB9412-81A***, BBS9412-81**, BBS9412-81A***, BBS9412-85**, BBS9412-85A***
    DATA SHEET   |   REPAIR KIT

    Extended Bonnet Cryogenic Globe Valves

    RegO® BK and BKA Series Valves
    The BK and BKA Series valves are designed exclusively for the handling of cryogenic liquids on bulk storage tanks, transports, and pipelines. These globe valves provide positive shutoff and offer a long, low-maintenance service life. The valves are available with a variety of inlet and outlet connections and stem lengths. Certain BK valves are offered with brazed-in schedule 5 and schedule 10 Stainless Steel Pipe Stubs.
    REPAIR KIT PART NUMBER(S): BKA8412-80J, BK9400-80J*, BK9416-80JS, BKY8408-80AJ, BK8400-80AJ, BK9400-80AJ, BK8400-80BJ, BKA8412-80JA*, BK9416-80AJ, BK8404-Kit BK8400-80J
    DATA SHEET   |   REPAIR KIT

    Manifolds

    Cryogenic Fill Manifold

    RegO® CFM, AFM & PFM Series
    RegO® Goddard high quality brazed and welded assemblies are ideally suited for the original equipment manufacturer of bulk cryogenic vessels. A wide variety of valve types including union or bolted bonnet, bronze bodies & top works and piping of stainless steel or copper construction are available as production unit.
    REPAIR KIT PART NUMBER(S): CFM2D-82
    DATA SHEET   |   REPAIR KIT

    RegO® CSB & CSM Series
    RegO® Goddard high quality welded and welded assemblies are ideal for the manufacturer of original equipment for bulk cryogenic vessels. Using the same technology of our globe valves with SK Series bolt cap, stainless steel bodies and superior works and stainless steel construction pipes are available as a production unit with stainless steel control block and control block brass. Ideal for all cryogenic liquids including Liquefied Nitrogen, Oxygen Argon, and CO2. Safe and reliably used in LNG Systems. In addition, RegO® can custom design configurations that are welded and brazed in a factory setting.
    REPAIR KIT PART NUMBER(S): CFM2D-82, CFM2D-86, CSM2D-86, SKM9408-83, SKM9412-83, SKM9408-80AJ, SKM9412-80AJ, SKM9408-80J, SKM9412-80J, SKM9408-KIT, SKM9412-KIT
    DATA SHEET   |   REPAIR KIT

    Gate Valves

    Extended Bonnet Bronze Gate Valve

    RegO® 322 and 326 Series
    The RegO® Goddard 322 and 326 Series gate valves are designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ASU plants and piping configurations. Compatible with oxygen, nitrogen, CO2, and argon.
    REPAIR KIT PART NUMBER(S): B-322-8-81, B-322-8-81, B-326-6-82, B-322-12-81, B-322-12-85, B-322-16-81, B-322-4KIT B-322-20-81, B-322-24-81, B-322-24-84, B-322-8-82, B-322-12-82, B-322-8-83, B-322-12-86, B-322-16-82, B-322-20-82, B-322-20-86, B-322-24-82, B-322-12-83, B-322-16-83, B-322-20-83, B-322-24-83, B-322-8KIT, B-322-12KIT, B-322-16KIT, B-322-20KIT, B-322-24KIT, B-326-4-81, B-326-6-81, B-326-8-81, B-326-12-81, B-326-16-81, B-326-16-1, B-326-4-82, B-326-6-82, B-326-8-82, B-326-12-82, B-326-16-82, B-326-4-83, B-326-6-83, B-326-8-83, B-326-12-83, B-326-16-83, B-326-4KIT, B-326-6KIT, B-326-8KIT, B-326-12KIT, B-326-16KIT
    DATA SHEET   |   REPAIR KIT

    Stainless Steel Gate Valve

    RegO® 110 Series
    RegO® Goddard gate valves are designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ASU plants and piping configurations. Compatible with oxygen, nitrogen, CO2, argon and LNG.
    REPAIR KIT PART NUMBER(S): S-110-08-81, S-110WHZ-08-81, S-110-08-82, S-110WHZ-8-82, S-110-08-83, S-110WHZ-08-83, S-110WHZ08-853, S-110-08-84, S-110-08-81, S-110WHZ-08-84, S-110-16-81, S-110WHZ-16-81, S-110-16-82, S-110WHZ-16-82, S-110-16-83, S-110WHZ-16-83, S-110-16-84, S-110WHZ-16-84, S-110-24-81, S-110WHZ16-853, S-110WHZ-24-81, S-110-24-82, S-110WHZ-24-82, S-110-24-83, S-110WHZ-24-83, S-110-24-84, S-110WHZ-24-84, S-110WHZ24-853, S-110-32-81, S-110WHZ-32-81, S-110WHZ32-853, S-110-32-82, S-110WHZ-32-82, S-110-48-82, S-110-32-83, S-110WHZ-32-83, S-110-32-84, S-110WHZ-32-84, S-110-48-81, S-110WHZ-48-81, S-110WHZ-48-82, S-110-48-83, S-110WHZ-48-83, S-110-48-84, S-110WHZ-48-84, S-110WHZ48-853
    DATA SHEET   |   REPAIR KIT

    RegO® 110WHZ Series
    RegO® Goddard gate valves are designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ASU plants and piping configurations. Compatible with oxygen, nitrogen, CO2, argon and LNG.
    REPAIR KIT PART NUMBER(S): S-110WHZ-48-83, S-110-48-83, S-110-48-82, S-110-48-81, S-110WHZ32-853, S-110-16-83, S-110WHZ-32-84, S-110WHZ-32-83, S-110-32-83, S-110-32-82, S-110-32-81, S-110-16-81, S-110WHZ-24-83, S-110-16-84, S-110WHZ-24-84, S-110WHZ-08-81, S-110WHZ-08-83, S-110WHZ08-853, S-110WHZ-08-84, S-110WHZ16-853, S-110-24-81, S-110-24-82, S-110-24-83, S-110-24-83,
    DATA SHEET   |   REPAIR KIT

    RegO® LOX Series
    RegO® LOX Series gate valves are designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ASU plants and piping configurations. Compatible with oxygen, nitrogen, CO2, argon and LNG. Specifically designed for liquid oxygen (LOX) service.
    REPAIR KIT PART NUMBER(S): LOX110W-08-85, LOX110W-08-86, LOX110W-08-87, LOX110W-16-85, LOX110WEP-16-85, LOX110W-16-86, LOX110W-32-85, LOX110W-24-85, LOX110W-48-85, LOX110WEP-48-85, LOX110WEP-32-85,
    DATA SHEET   |   REPAIR KIT

    Check Valves

    Stainless Steel Swing Check Valve

    RegO® 886 Series
    The RegO® Goddard 886 Series check valve is designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ISO-containers and piping configurations. Compatible with oxygen, nitrogen, CO2 argon and LNG.
    REPAIR KIT PART NUMBER(S): S-886-04-82, S-886-08-82, S-886-12-82, S-886-16-82, S-886-24-82, S-886-32-82, S-886M-04-82, S-886M-08-82, S-886M-12-82, S-886M-16-82, S-886M-24-82, S-886M-32-82, S-886GF-04-82, S-886GF-12-82, S-886GF-08-82, S-886-04-83, S-886M-8-83, S-886M-16-83, S-886M-12-83, S-886M-24-83, S-886M-32-83, S-886GF-04-83, S-886GF-08-83, S-886GF-12-83
    DATA SHEET   |   REPAIR KIT

    Bronze Swing Check Valve

    RegO® 846M Goddard 840 Series
    The RegO® Goddard 846M and 840 series check valve is designed for handling of cryogenic liquids through bulk tanks, trucks, trailers, ISO-containers and piping configurations. Compatible with oxygen, nitrogen, CO2, argon and LNG.
    REPAIR KIT PART NUMBER(S): B-840-4-82, B-840-6-82, B-840-8-82, B-840-12-82, B-840-16-82, B-846M-4-82, B-846M-6-82, B-846M-8-82, B-846M-12-82, B-846M-16-82
    DATA SHEET   |   REPAIR KIT

    Flanged Internal Valves for Bobtail Delivery Trucks, Transports and Large Stationary Storage Containers

    RegO® TA3217 Series
    Designed primarily for CO2 filling and/or withdrawal on bobtail delivery trucks, transports and stationary storage tanks with flanged pumps or piping. Installation is quick and easy, and the valve may be operated manually by cable or pneumatically. Lever available on right or left side to allow for installation without the use of an extra pulley.
    REPAIR KIT PART NUMBER(S): TA3217AR-80
    DATA SHEET   |   REPAIR KIT

    Regulators

    Aluminum Pressure Regulators

    RegO® 1682M Series & C-1682M Series
    The 1682M Series Regulators are designed primarily for second stage regulation of a variety of gases in industrial and hospital piping systems and manifolds. The C-1682M Series is specifically designed for use with Carbon Dioxide.
    REPAIR KIT PART NUMBER(S): 1682Y-80, C-1682M-80, 1686Y, 1688Y, 1684MHP-80, 1684M-80, 1686M-80, 1682M-80, 1684Y-80, 2523HP-80A, 2523HP-80B
    DATA SHEET   |   REPAIR KIT

    Automatic Changeover Regulators

    RegO® M2523HP Series
    M2523HP series automatic changeover regulators are designed especially for use in systems where a reserve cylinder is used to provide a continuous, uninterrupted supply of gas. These regulators are suitable for use with carbon dioxide, hydrogen, oxygen, industrial air, nitrous oxide, nitrogen, helium and argon.
    REPAIR KIT PART NUMBER(S): 2523HP-80A, 2523HP-80A, 2523HP-80B
    DATA SHEET   |   REPAIR KIT

    Cryogenic 1/2" Combination Pressure Builder/Economizer for Bulk Vessels

    RegO® CB504 Series
    Obsolete
    REPAIR KIT PART NUMBER(S): CB504
    REPAIR KIT

    Cryogenic 1/2" Pressure Builder

    RegO® PB504 Series
    PB series cryogenic regulators are primarily designed to maintain the pressure in cryogenic containers; they may also be used as a line regulator for cryogenic lines and cold gas lines. They are specifically useful in installations where the precision in pressure control and flow capability are important. For use with oxygen, nitrogen, argon, LNG and CO2.
    REPAIR KIT PART NUMBER(S): PB504-80R, PB504-81R
    DATA SHEET   |   REPAIR KIT

    Heavy Duty Brass Final Line Pressure Regulator

    RegO® BR-1780 Series
    BR-1780 Series Regulators are designed for final line pressure regulation on medical oxygen systems. They are equally suitable for a variety of gases in medical or industrial applications. The BR-1780 Series Regulators have a balanced seat, are constructed with oxygen compatible materials, and offer a tamper resistant adjustment screw cap. Flow performance is impressive as well offering up to 30,000 SCFH for the ¾” and 1” model and up to 20,000 SCFH for the ½” model. Compatible with oxygen, nitrogen, argon, hydrogen, helium, CO2, and LNG.
    REPAIR KIT PART NUMBER(S): BR-1784-80, BR-1786-80, BR-1784-7SKA, BR-1784-7SKB, BR-1784-7SKC, BR-1784-7SKD, BR-1786-7SKA, BR-1786-7SKB, BR-1786-7SKD, BR-1786-7SKC, BR-1788-7SKA, BR-1788-7SKB, BR-1788-7SKD, BR-1788-7SKC
    DATA SHEET   |   REPAIR KIT

    Heavy Duty Gas Line Regulator

    RegO® 1780 Series
    The 1780 Series Regulators are designed for final line pressure regulation on gas distribution systems. They are suitable for a variety of gases in medical or industrial applications. The 1780 Series Regulators have a balanced seat, are constructed with oxygen compatible materials, and have the same valve design, brass body, and internal parts as the premium BR-1780 Series. Flow performance is equal to the BR-1780 Series. Compatible with oxygen, nitrogen, argon, hydrogen, helium, CO2, and LNG.
    REPAIR KIT PART NUMBER(S): BR-1784-80, BR-1786-80, BR-1784-7SKA, BR-1784-7SKB, BR-1784-7SKC, BR-1784-7SKD, BR-1786-7SKA, BR-1786-7SKB, BR-1786-7SKD, BR-1786-7SKC, BR-1788-7SKA, BR-1788-7SKB, BR-1788-7SKD, BR-1788-7SKC,
    DATA SHEET   |   REPAIR KIT

    Master High Pressure Valves

    High Pressure Gas Master Valves

    RegO® HP9560 Series
    The HP9560 Series high pressure brass valves are used on cylinder filling panels, tube trailers, and high pressure manifolds and piping systems. The HP9560 Series exhibits a very low operating torque under pressure for ease of manual operation.
    REPAIR KIT PART NUMBER(S): 9500-80K*, 9550-80, 9550-3-80, 9560-81, 9560C-80, 9560-80, 9560N-80, 9560-4-80 9560-7-80, 9560-8-80
    DATA SHEET   |   REPAIR KIT

    Line Station Valves

    RegO® 7160 Series
    7160 series valves are designed for use with oxygen and all fuel gases at station outlets of line distribution systems such as welder’s benches, cutting stations, hospital rooms, etc.
    REPAIR KIT PART NUMBER(S): 7160-80B
    DATA SHEET   |   REPAIR KIT